 Our glass restoration services in Atlanta are just a phone call away. Our glass restoration and glass renewal services often save a substantial amount of money when compared to glass replacement.
Commercial glass restoration and glass scratch removal are an art form that we have perfected over the years. We have the knowledge, the correct tools, and the proper equipment to perform a wide variety of repairs to glass surfaces. We can effectively remove hard water stains, mineral staining and scratches from glass. Our commercial glass restoration services can be performed at the ground level, or we have the equipment and knowledge, to perform high rise glass restoration and glass stain removal services. Commercial buildings receive glass staining due to various environmental conditions. Learn about how and why architectural glass gets stained. After the restoration process, wee suggest the installation of a silicone protective treatment to the glass in order to help protect the surface from future staining and corrosion. Glass Stains and Hard Water Stain RemovalMany high rise buildings get glass stains due to exposure to the elements, high amounts of tap water from sprinkler system overspray, or minerals leaching from adjacent pre-cast onto the glass surfaces. Removing mineral stains and etching from glass is our specialty.
 After the damaging elements have corroded the surface of the glass, often referred to "stage 2 corrosion" the glass should be resurfaced to effectively remove the damage. A word of caution. Inexperienced glass cleaning companies often damage the surface of the glass while attempting to restore the glass. It is important to restore a sample window in order to ensure that the desired glass restoration results are being achieved. One should examine the test area in direct sunlight from a variety of angles in order to ensure that the glass is not burned or scratched prior to having the windows restored on the entire building. Our glass restoration process has been documented through independent lab results to restore glass to it's original intended condition. Glass restoration is fast and affordable with our cutting edge products and techniques. Glass Scratch Removal ServicesCommercial glass scratch removal saves a considerable amount of money when compared to glass replacement.
When scrapers are used to remove paint or caulking from windows, they often get scratched. Scrapers used during the construction clean up can also scratch glass. In our experience the majority of window scratches occur during the construction phase, and are usually not noticed until later. We can even remove deep scratches that other contractors are unable to, or unwilling to remove. For over a decade, Top of the Line has been in the business of restoring windows to their original luster. Glass restoration is a highly specialized service that requires qualified management and technicians, the proper products and extensive experience. Improper products and techniques can result in severely scratched and noticeably damaged glass. Industry standard techniques often use harsh, abrasive products in an attempt to remove stains from the highly polished glass surface. This causes severe scratches in the glass. Other industry standard techniques involve the use of harsh acids that can leave burns in the glass and surrounding architectural materials creating a hazed look. Top of the Line's technique completely removes stains from the glass without leaving any scratches or burns and producing a highly reflective finish.
Glass Restoration - The Right Way Vs. The Wrong Way With the help of a team of highly experienced chemists, we have developed our own products for the restoration of glass, metal and stone surfaces. We created these products after seeing an absence of products on the market that could effectively and safely combat staining on architectural surfaces. Presto Restoration Products has developed The Glass ReSurfacer System that produces a highly polished and reflective finish on glass. Our methods will not scratch or burn the glass; rather, they will leave the glass looking brand new. After restoring your glass, we apply a protective coating that will last five, 10 or even up to 20 years depending on the product selected. This protective coating is The Glass Defender Series.
|
| Stains are easily removed after our glass protective treatment. |
|
 |
This picture demonstrates the water beading effect of glass protected with Glass Defender MD. |
Trust your property to a professional company that is experienced in keeping buildings beautiful. We understand that image is everything.
Our lifetime warranties are contingent upon the proper maintenance of the property using Top of the Lines's recommended products and services. The use of our specialized products and techniques is critical, because we have found the use of inferior products to be a major cause of building staining. Standard window-cleaning detergents, tap water with a high mineral content and inferior water repellants are the three major causes of Brown Building Syndrome. Presto's product line is designed to work synergistically to clean and restore the various architectural materials present on each property.
If the buildings are properly maintained in accordance with our recommendations, the extensive restoration should not have to be performed again.
In contrast to industry standard cleaning practices, our products and procedures do not damage the protective coatings, therefore preserving the restoration investment on your property.
The exterior of a building can be compared to a bath tub. Imagine cleaning your bath tub every six months in the same manner in which the windows on your building are cleaned. The tub is cleaned by briskly wiping soapy water on the surface and removing it with a squeegee. This method would produce soap scum in your tub in the same manner in which it produces scum on your building. Since there are limitations that don't allow you to clean your building more frequently, the solution is to eliminate these minerals and soap that are causing the scum on your building.
We invite you to take advantage of our superior window cleaning services after restoration. Top of the Line will clean your windows using deionized water and a window-cleaning additive that does not leave an oily residue behind. This will effectively keep your building looking new all year around. Top of the Line is fully compliant with the I-14 Safety Standard, and we are proud to say that we have serviced commercial high-rise properties for over a decade without any serious-injury accidents.
After the glass restoration process, our recommended specific maintenance procedures that must be followed in order to maintain the Lifetime Warranty. Recommended services are as follows:
Limited Lifetime Warranty Against Glass Stains
When Top of the Line provides regular maintenance for your building after performing our glass restoration services, you will have a limited lifetime warranty against future glass stains. Our warranty covers both products and labor. In the event that your property develops additional glass staining, Top of the Line will remove the stains for no additional charge.Our lifetime warranties are contingent upon the proper maintenance of the property using Top of the Lines's recommended products and services. The use of our specialized products and techniques is critical, because we have found the use of inferior products to be a major cause of building staining. Standard window-cleaning detergents, tap water with a high mineral content and inferior water repellants are the three major causes of Brown Building Syndrome. Presto's product line is designed to work synergistically to clean and restore the various architectural materials present on each property.
If the buildings are properly maintained in accordance with our recommendations, the extensive restoration should not have to be performed again.
In contrast to industry standard cleaning practices, our products and procedures do not damage the protective coatings, therefore preserving the restoration investment on your property.
The exterior of a building can be compared to a bath tub. Imagine cleaning your bath tub every six months in the same manner in which the windows on your building are cleaned. The tub is cleaned by briskly wiping soapy water on the surface and removing it with a squeegee. This method would produce soap scum in your tub in the same manner in which it produces scum on your building. Since there are limitations that don't allow you to clean your building more frequently, the solution is to eliminate these minerals and soap that are causing the scum on your building.
We invite you to take advantage of our superior window cleaning services after restoration. Top of the Line will clean your windows using deionized water and a window-cleaning additive that does not leave an oily residue behind. This will effectively keep your building looking new all year around. Top of the Line is fully compliant with the I-14 Safety Standard, and we are proud to say that we have serviced commercial high-rise properties for over a decade without any serious-injury accidents.
After the glass restoration process, our recommended specific maintenance procedures that must be followed in order to maintain the Lifetime Warranty. Recommended services are as follows:
- Exterior window and frame cleaning recommended semi-annually using deionized water and Scumfrees Window Cleaning Concentrate. This detergent is designed to not leave an oily residue on the building like most other window cleaning detergents, and it will not aid in the redevelopment of stains on the building.
- Exterior gentle rinse of the building using deionized water and Green-Kleen non scum-forming cleaner recommended every one to two years. This will help to remove the contaminate build up and biological growth that accumulates on the precast materials before it becomes a problem. This process will not affect any of the protective coatings on the building.
- Reapplication of glass protection every five to 10 years depending on the product selected after the restoration process.
- Reapplication of precast protection every five to 10 years depending on the product selected after the restoration process.
View additional glass restoration and protection services.
Our Glass Restoration Service Area
|
|
|
|